Troubleshooting a Water Heater Emergency: What to Do When It Stops Working
Troubleshooting a Water Heater Emergency: What to Do When It Stops Working
Blog Article
Listed here down the page you can discover additional quality advice involving How to Troubleshoot and Repair an Electric Water Heater.
Many contemporary houses make use of an electrical hot water heater for their heating system, because of its benefit and simplicity of use. Nevertheless, similar to any other electrical appliances, problems might develop with its use, all of a sudden. It can be really irritating to awaken to a chilly shower rather than a hot one or having your bathroom with water that isn't warm sufficient or even as well hot. Whatever the instance might be, water heater troubles can be rather nerve-racking. Fortunately, we have actually made a listing of possible solutions to your hot water heater problems. There are a number of variables that might create most of these issues, it could be an issue with the power supply, the electric heating element, or the thermostat. Prior to doing anything, ensure you switch off the primary power supply for safety. Whatever the issue is, getting it repaired need to not posture excessive of an issue if you adhere to these actions:
Check Your Power Supply:
As standard as this may appear, it is extremely needed. Without appropriate power, your water heater will certainly not work. So the first thing to do when your water suddenly stops working is to verify that it isn't a power issue. Examine if the fuse is blown out or the breaker tripped. If the circuit breaker is the problem, simply transform it on and off again. Replace any type of damaged or damaged fuse. Examine the home appliance with power after these modifications to see if it's currently functioning.
Examine the Heating Element in the Hot Water Heater:
If it's not a power problem, then attempt having a look at your burner if it is still functioning. Evaluate each of your burner to ensure the problem isn't with any one of them. If any of them is malfunctioning, change that part and then inspect whether the warm water is back on.
Check Your Thermostat:
If your water heater still isn't functioning or the water coming out isn't hot sufficient, you may require to check the temperature level settings on your top thermostat. Ensure the circuit breaker is turned off prior to doing anything. Open up the access panel and press the red switch for temperature level reset over the thermostat. This should assist heat up the water. Turn the circuit breaker back on as well as examine if the trouble has been fixed.
Call A Specialist:
If after changing all damaged parts as well as resetting your temperature level, the hot water heater still isn't functioning, you might require to speak to an expert plumber for a professional opinion. The problem with your heating unit could be that the cold and hot faucets have actually been switched over or it might be undersized for the quantity of warm water required in your house. Whatever the instance might be, a professional plumber would help solve the problem.
Conclusion
Water heater problems are not constantly significant. Many of them are because of minor issues like a blown fuse or worn-out heating element. Changing the damaged components must work. Nevertheless, if you are still not able to fix the issue, give a call to your closest plumber to come to get it fixed.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
Hopefully you liked our part on Hot Water Heater Repair. Many thanks for finding the time to read our posting. Those who enjoyed reading our blog posting please don't forget to share it. Many thanks for taking the time to read it.
Schedule Your Service Report this page